BGQZP - METEX ELECTROLESS NICKEL 8031-S

  • MSDS: BGQZP
  • Manufacturer: MACDERMID INC
  • Product Name: METEX ELECTROLESS NICKEL 8031-S
  • National Stock Number: 8030-01-230-4982
Product Identification

Product ID:METEX ELECTROLESS NICKEL 8031-S
MSDS Date:01/01/1987
FSC:8030
NIIN:01-230-4982
MSDS Number: BGQZP

Responsible Party
MACDERMID,INC.

Emergency Phone: 203-754-6161

Cage: KO215

Contractor
MACDERMID,INC.
671 WATERBURY, CT 06720 US

Telephone: 203-575-5700

Cage: KO215

Ingredients

NICKEL SALTS (ACCD TO IARC,IS A KNOWN/PROBABLE HUMAN

Fraction By Weight: 40%

ACGIH TLV: 0.1MG/CUM,AS NI

Hazards

Effects of Overexposure:IRRITATION TO EYES,SKIN & MUCOUS MEMBRANES.

First Aid

First Aid:EYES:FLUSH W/WATER FOR 15 MINUTES. CONSULT PHYSICIAN.
SKIN:FLUSH W/WATER. INTERNAL:GIVE WATER,INDUCE VOMITING (MFR). CALL
PHYSICIAN.

Fire Fighting

Flash Point:NONFLAMMABLE
Extinguishing Media:COMPATIBLE W/WATER SPRAY,CO*2,DRY
CHEMICAL,FOAM,HALON.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE GEAR .
Unusual Fire/Explosion Hazard:RELEASES TOXIC & FLAMMABLE PHOSPHINE GAS
WHEN THERMALLY DECOMPOSED.

Accidental Release

Spill Release Procedures:FLUSH SPILLED MATERIAL TO CHEMICAL TREATMENT
DRAIN W/COLD WATER.

Handling

Handling and Storage Precautions:KEEP IN CLOSED CONTAINERS IN A COOL
STORAGE LOCATION.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED (MFR)
Ventilation:MECHANICAL (GENERAL)
Protective Gloves:RUBBER
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:RUBBER APRON,BOOTS
Supplemental Safety and Health
DATE OF PREP:8/28/81.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>212F,100C
Spec Gravity:1.280
Solubility in Water:COMPLETE
Appearance and Odor:DARK GREEN SOLUTION,SHARP ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Hazardous Decomposition Products:OXIDES OF CARBON,SULFUR,&PHOSPHORUS.
PHOSPHINE GAS.

Disposal

Waste Disposal Methods:REQUIRES LIME TREATMENT AT ELEVATED TEMPERATURES
(MFR). CONSULT MACDERMID,INC. FOR DETAILED PROCEDURE. WASTE
DISPOSAL MUST BE IN ACCORDANCE W/FEDERAL,STATE & LOCAL REGULATIONS
.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.